Hubei Dingshi Cable Co., Ltd.
Main products:LAN Cable,Electric Wire,Computer Cable
Products
Contact Us
  • Contact Person : Mr. Zhu Nicholas
  • Company Name : Hubei Dingshi Cable Co., Ltd.
  • Tel : 86-755-29532139
  • Fax : 86-755-27474791
  • Address : Guangdong,Shenzhen,2F,3rd Building,Jinfo Industrial Park,Xixiang
  • Country/Region : China
  • Zip : 518126

PoE Splitter&Injector

PoE Splitter&Injector
Product Detailed
PoE Cable PoE Splitter and PoE Injector 5.5mm*2.1mm DC Connector RJ45 port OEM Service POE cable

The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device). Contains: INJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.Connector Barrel size is 2.1mm (5.5 x 2.1 mm) Power Pins 4,5 + and 7,8 -

1. It is very simple to connect a passive PoE. On the lower part, we connect the EthernetRJ connector of passive PoE to the PC, Hub or Switch and connect the power adapterto the power socket.2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.3. At the far end, we connect the end of the Ethernet cable to the RJ socket and connectthe power connectors and the Ethernet to the powered equipment. The equipment is nowconnected by them. 

PoE Splitter&Injector



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.